Click this link to read the web version: Manufacturing Center
Image - Why Choose Siemens for Your Repair?Why Choose Siemens for Your Repair?

Siemens maintains a fully-equipped repair facility, centrally located in the United States. Bring your motors back to factory specifications. Saves you the cost of motor replacement. Technicians all factory-trained with full one-year warranty on parts, not just the repair.
Learn more about our parts and repair program.

Get a competitive quote on your motor repair today — save 10% by mentioning code 10WS! CNCparts.industry@siemens.com

Tel: +1 (800) 879-8079


Image - Reduce Thrust Loads by 90%Reduce Thrust Loads by 90%

The Mega Synchro Tapping Holder, available from BIG Kaiser, compensates for synchronization errors during rigid tapping. It improves thread quality and tool life by reducing thrust loads caused by synchronization errors by as much as 90%. And with almost 50 bodies and over 250 tap holders available, an optimal configuration is available for most any operation, micro-to-large.

Click here to watch it in action and here to learn about the limited time promotional offer!


Image - A Mitsui Seiki for the Job ShopA Mitsui Seiki for the Job Shop

Owning a precision Mitsui Seiki HMC is within reach. The new HU63-EX has been designed with the subcontract shop in mind. It is engineered to boost metalworking productivity through a combination of precision, power, and torque. The focus on accuracy and rigidity produces repeatable precision performance.

Find out more.


Image - Expand the Possibilities of GaugingExpand the Possibilities of Gauging

Introducing EQUATOR™ from Renishaw -- the revolutionary system creating a solution between custom gauging and CMMs. Equator™ is a dramatic departure from the constraints of choosing either a custom gauging solution or using a CMM. Experience up to 70% savings and reduced fixture, installation and maintenance costs. Different parts, same Equator -- never buy another custom gauge.

See Equator in action.


Image - Industrial Vacuum Cleaner for the Metalworking IndustryIndustrial Vacuum Cleaner for the Metalworking Industry

The 55MW is designed for liquids and liquids with metal chips or shavings. Operators can empty machine tool sumps, machining beds, oil/water separators, parts washers, rinse tanks. Particles are separated from collected liquid with the Chip Basket and Liner. The 55MW will clean up at rates of 1-2 gallons per second. The 55MW Industrial Vacuum Cleaner will pump out the liquid contents of the drum through the discharge hose to a central filtration system for coolant/oils or approved floor drain.


800-822-8629 or www.vac-u-max.com/vacuum


Image - Tackle the Challenges of Removing Surface (free-floating) Oil, Quickly, Easily...Tackle the Challenges of Removing Surface (free-floating) Oil, Quickly, Easily...

And generate a profit! In this FREE whitepaper, learn how our 40+ years of tube type oil skimming experience with thousands of applications, in all industries, can help turn your problems into profits.

Oil Skimmers, Inc.


Subscribe to Manufacturing Center

Nelson Publishing, LLC | www.manufacturingcenter.com
PO Box 424, Alto, MI 49302
Phone: 941-539-7579
webmaster@manufacturingcenter.com