|LaserStar's CNC Laser Machining Centers|
CNC Laser Machining Centers are custom-built workstations configured for laser cutting. These machining centers produce high quality, dimensionally accurate laser cuts for a wide range of industrial applications. The state-of-the-art, fully integrated laser source provides excellent beam quality while producing many years of reliable performance. Made in USA.
|The Future of CNC|
SINUMERIK from Siemens offers advanced technology, plus the benefits of an easy-to-use CNC interface. Every Siemens control features SINUMERIK Operate interface, providing machine-to-machine familiarity and faster setups, plus simplified networking and file sharing save time and money. Our CNC platform includes:
- SINUMERIK 840D sl for multi-axis machining
- SINUMERIK 828D family for milling and turning applications
- SINUMERIK 808D to upgrade existing knee mill machines
Watch this video to learn more / See the future here
|VAC-U-MAX 55MW Industrial Sump Vacuum Cleaner Recovers 3 to 8 Liters (1 to 2 Gallons) of Liquid per Second|
Unit allows operators to quickly clean up liquid spills, empty machine tool sumps, machining beds, oil/water separators, parts washers, and rinse tanks. System includes chip basket and liner that separates solid particles from collected liquid. Filtered liquid content is pumped from drum through discharge hose to a central filtration system for coolant/oils or approved floor drain at up to 53 liters (14 gallons) per minute. Unlike other sump suckers, the VAC-U-MAX 55MW also works easily with 100% dry chips, providing more versatility in machine shops.
|Coolant Mist Collector|
Handte EM Profi emulsion/coolant mist collector for machining centers offers very high collection efficiency and "24/7" performance for increased productivity, service ease and lower operating costs. Patented automatic sprayer counteracts emulsion coolant clumping to reduce maintenance. Service life is up to six years for primary filters. 12-year limited warranty.
|Measure Six Degrees of Freedom from a Single Set-Up|
XM-60 is a powerful diagnostic laser measurement system capable of measuring errors in linear, pitch, yaw, roll, horizontal and vertical straightness measurements simultaneously from a single set-up. All six degrees of freedom are measured in the same time as a single measurement with a conventional laser. The performance of each XM-60 multi-axis calibrator is traceable to international standards and every unit is certified before shipment.
|Heavy Duty HEPA Vac|
EXAIR's compressed air operated Heavy Duty HEPA Vac attaches to an ordinary 30, 55 or 110 gallon open top drum to turn it into a powerful, HEPA quality, industrial vacuum cleaner. The Heavy Duty HEPA Vac has been engineered to move material with less wear.
Website offers detailed information.
|Low-Cost MicroLiner Marker|
Due to part identification requirements and economic conditions, there is a strong need for affordable, automated component marking. Borries Marking Systems has responded with the MicroLiner compact marker. The unit can generate scribed or dot matrix characters, as well as ECC200 DataMatrix marking for automated vision systems. The DotMatrix is fully programmable, marking up to four characters per second.
Click here to get more information on Borries Marking Systems.
|Catalog of Ovens and Furnaces|
Over 400 standard ovens and furnaces, with temperatures to 2700°F, are described in this catalog from Grieve. Custom-designed heat processing systems, too. Grieve offers laboratory, bench, cabinet, truck, walk-in and conveyor ovens; cleanroom and pharmaceutical ovens; laboratory and industrial furnaces; environmental test chambers and more.
THE GRIEVE CORPORATION
Attention: Frank Calabrese